The key to mold control
is moisture control. Solve moisture problems before they become
mold problems!
Mold
Prevention Tips |
- Fix leaky
plumbing and leaks in the building envelope as soon
as possible.
- Watch for
condensation and wet spots. Fix source(s) of moisture
problem(s) as soon as possible.
- Prevent moisture
due to condensation by increasing surface temperature
or reducing the moisture level in air (humidity).
To increase surface temperature, insulate or increase
air circulation. To reduce the moisture level in air,
repair leaks, increase ventilation (if outside air
is cold and dry), or dehumidify (if outdoor air is
warm and humid).
- Keep heating,
ventilation, and air conditioning (HVAC) drip pans
clean, flowing properly, and unobstructed.
- Vent moisture-generating
appliances, such as dryers, to the outside where possible.
- Maintain
low indoor humidity, below 60% relative humidity (RH),
ideally 30-50%, if possible.
- Perform regular
building/HVAC inspections and maintenance as scheduled.
- Clean and
dry wet or damp spots within 48 hours.
- Don't let
foundations stay wet. Provide drainage and slope the
ground away from the foundation.
|
|